Life-saving Tips About Check Engine Light On And Off
- charliesamuel673
- Aug 13, 2022
- 3 min read
The Check Engine Light is a warning indicator that the vehicle's computer has detected an issue with one or more systems.
The Check Engine Light may be illuminated when:
A sensor detects a problem with the vehicle's emissions system, such as a malfunctioning oxygen sensor or exhaust gas recirculation (EGR) valve.
An airbag control module detects an abnormal condition in which it believes there is a risk of injury to the driver or passenger.
A fuel injector malfunctions and causes excessive smoke from the tailpipe.
A malfunctioning ignition switch can cause the Check Engine Light to illuminate.
An electrical short circuit in the wiring harness could also cause the Check Engine Light.
Check Engine Light Symptoms
When the Check Engine Light comes on, you will see several symptoms depending on what caused the light to come on. If your Check Engine Light came on due to a malfunction in the emissions system, you might notice a strong odor of burning rubber from the tailpipe. This is because the EGR valve is not working correctly. You may also hear a loud "ping" sound as the EGR valve opens and closes.
If your Check Engine Light came up due to a malfunction in your airbag control module, you might feel a sharp jolt as the airbags deploy. In addition, you may hear a high-pitched whine as the airbag control module activates. If your Check Engine Light came from a malfunctioning fuel injector, you might smell gasoline fumes in the cabin. If your Check Engine Light came from a shorted wire, you might notice a dimming effect on the dashboard lights. If you want to learn more about check engine light on and off, then read more
How to Diagnose Your Vehicle's Check Engine Light
To diagnose your vehicle's Check Engine light, follow these steps:
1. Turn the key to the "On" position.
2. Press the brake pedal until the brake lights turn on.
3. Release the brake pedal.
4. Start the engine by pressing the accelerator pedal to the floor.
5. When the Check Engine Light illuminates, release the brake pedal.
6. Allow the Check Engine Light to remain illuminated for at least 10 seconds.
7. Repeat Steps 1 through 6 if necessary.
8. After the Check Engine Light goes out, repeat Step 2.
9. If the Check Engine Light does not go out after repeating Step 2, continue to repeat Steps 1 through 8.
10. If the Check Engine light remains lit even after repeating Steps 1 through 8, contact a professional mechanic.
Can I drive my car without having a check engine light on?
Yes, but only if you have a valid inspection sticker and drive within the manufacturer's recommended maintenance schedule. Stop immediately and park your vehicle. Do not attempt to go away. Contact a local garage for assistance. The Check Engine Light is designed to warn drivers of something wrong with their vehicle. It is not a warning sign that your car has serious problems. You should stop immediately and park your vehicle so that no one gets hurt.
I was involved in an accident. What do I need to do now?
In case of an accident, staying calm and keeping yourself safe is essential. Call 911 or another emergency number and tell them about the accident. Stay at the scene of the accident until help arrives. Be sure to note down all information about the accident, including the location, time, weather conditions, etc.
· Don't leave the scene of the accident unless directed to do so by police officers.
· Do not move any vehicles involved in the accident.
· Stay clear of the damaged area.
· Call your insurance company right away.
· Keep your driver's license and registration card handy.
· Take pictures of the damage to your vehicle.
· Make copies of all documents related to the accident.
Comments